Umshini wokushisela we-laser wepulasitiki uqukethe i-semiconductor laser, amakhanda okushisela akhethekile kanye nesoftware kanye namamojula alayini we-3-axis, anokuvalwa kobufakazi bemisebe kanye nomklamo odidiyelwe womshini, ugesi, amanzi negesi ngokuhambisana namazinga omhlaba.Umshini uyakwazi ukufundisa ithrekhi eqhubekayo nokulawula kude.
1. Ukulawulwa kwekhwalithi yesikhathi sangempela ngesistimu yokuqapha ye-CCD kanye ne-temperature probe.
2. Ukubonisa i-welding seam emincane nokubukeka okuhle endaweni yokushisela
3. Iyakwazi ukwenza imikhiqizo yokushisela enobumo obuyinkimbinkimbi, futhi ingashisela ama-workpieces anoma yimuphi usayizi;
4. Isidingo esiphansi samandla we-laser;
5. Akukho ukuwohloka kwe-resin futhi cishe akukho mfucumfucu ngesikhathi senqubo yokushisela, futhi ingasetshenziswa ngokuqondile ngemva kokushisela.
6. Ukusebenza kahle kokucubungula okuphezulu.
Ipharamitha Yezobuchwepheshe | ||
Cha. | Into | Ipharamitha |
1 | Amandla e-laser | 100W |
2 | Laser wavelength | 915nm |
3 | Imodi yokusebenza | Okuqhubekayo/okuguquguqukayo |
4 | Ibanga lendawo yokusebenza | I-X eksisi: 300mm;I-eksisi ye-Y: 200mm;I-axis ye-Z: 100mm;(kungenziwa ngokwezifiso ngokuya ngezidingo zekhasimende) |
5 | Ukumisa ukunemba | X/Y/Z hawu:≦0.05mm |
6 | Isivinini sokusebenza | X/Y/Z hawu:100mm/s |
7 | Ububanzi bomugqa wokushisela | 0.5-3.0mm |
8 | Umsebenzi wesoftware | Multi-axis ukuxhumana laser welding software |
9 | Indlela yokupholisa | Ukupholisa umoya |
10 | Ukunikezwa kwamandla kagesi | I-AC 220V±10%,50/60Hz |
11 | Ukusetshenziswa kwamandla | 1500W |
12 | Indawo yokusebenza | Izinga lokushisa: 10 ~ 35 ℃;Umswakamo≤85% |
Ifanele izinto zokwakha |
Ifanele i-ABS, i-PP, i-PE, i-PA, i-PC, i-PS, i-PVC, i-PBT, i-POM, i-PET, i-PMMA nezinye izinto ze-thermoplastic kanye namapulasitiki ahlukahlukene wobunjiniyela |